Winter Construction Precautions for JRPP Low Temperature Impact: JRPP (jointless reinforced plastic pipe) materials may become brittle at low temperatures, increasing the risk of cracking during transportation, handling, and installation. Pre-construction Inspection: Check pipes and fittings for any signs of damage, such as cracks, dents, or deformation caused by cold weather. Thawing Requirements: If materials are frozen or covered with ice, allow them to thaw naturally in a protected environment before use. Installation Temperature: Avoid installing JRPP when ambient or ground temperatures are too low (follow manufacturer recommendations, typically above 0°C or as specified). Trench Preparation: Ensure trenches are free of frozen soil, ice, or snow. Frozen subgrade should be removed and replaced with suitable backfill material. Backfilling: Use granular, unfrozen backfill material. Avoid using frozen clods or large ice chunks, which can cause uneven settlement and damage to the pipe. Sealing and Connection: Pay special attention to joint sealing. Cold temperatures can affect the performance of adhesives or sealing materials; use products suitable for winter conditions. Protection After Installation: Cover exposed pipes to prevent freezing and damage from construction activities. Product Storage Issues in Winter Storage Environment: Store JRPP in a dry, covered area protected from direct sunlight, rain, snow, and extreme cold. Avoid leaving materials outdoors for extended periods. Temperature Control: If possible, maintain a moderate storage temperature to prevent material embrittlement. Avoid storing near heat sources that could cause thermal stress. Stacking and Handling: Use proper stacking methods to prevent deformation. Avoid dropping or rough handling, as low temperatures increase the risk of cracking. Packaging Protection: Keep original packaging intact to protect against moisture and physical damage. Inventory Management: Rotate stock to ensure older materials are used first, reducing the risk of degradation from long-term winter storage. Risk Mitigation and Recommendations Develop a winter construction plan specific to JRPP, including temperature monitoring and material handling procedures. Train construction personnel on winter installation techniques and the proper use of cold-weather compatible adhesives and sealants. Maintain close communication with suppliers to ensure materials are shipped and stored under appropriate conditions. Conduct regular inspections of stored and installed materials to identify potential issues early. By following these precautions and addressing storage issues, the performance and longevity of JRPP in winter construction projects can be significantly improved.

The core of winter construction for JRPP (reinforced polypropylene) pipes lies in avoiding low-temperature brittleness, ensuring fusion quality, and implementing effective anti-freezing and protective measures. Below are the key considerations by phase, balancing material properties and construction standards. 1. Pre-construction Preparation Material Storage and Preprocessing Pipes and fittings should be stored in warehouses or simple sheds, avoiding exposure to freezing temperatures and direct sunlight outdoors. The stacking height should be ≤1.5m to prevent deformation from heavy pressure. Do not throw, drop, roll, or drag during handling to avoid hidden damage. If there is a significant temperature difference between the site and the storage location, place the pipes and fittings at the site for more than 24 hours before installation to allow their temperature to approach the construction environment, thereby reducing potential connection hazards caused by thermal expansion and contraction. Before construction, inspect each pipe individually and remove those with stress-induced whitening, scratches, or internal wall damage to eliminate hidden defects. Environmental and Personnel Control When the ambient temperature falls below 5°C, warming and insulation measures (such as building insulated sheds or using air heaters) must be taken. Below 0°C, outdoor construction should be minimized, and operations must be suspended during rainy, snowy, or windy weather to prevent joint moisture or brittle cracking of pipes. Construction personnel must undergo specialized training to become familiar with the adjustment of hot-melt/electric-melt parameters and emergency handling procedures at low temperatures. Preparation of Tools and Auxiliary Materials Inspect specialized tools such as hot melt/electric melt welders and cutting machines to ensure they are functioning properly. Prepare auxiliary materials including anhydrous ethanol, fine sandpaper, insulation materials, and sand. Prepare windproof, rainproof, and thermal insulation facilities, such as thermal blankets and tarps, to avoid interference from environmental factors during the welding process. II. Construction Process Control

In various fields such as building plumbing, municipal construction, and agricultural drainage, the quality of pipelines directly impacts usage safety and long-term benefits. Qingdao Laoshan Pipe Industry, as a leading enterprise specializing in plastic pipelines, upholds the core promise of "Laoshan Pipes for Peace of Mind." Through technological innovation, stringent quality control, and comprehensive services, it has become a trusted choice for countless users.A diversified product matrix, catering to all scenariosQingdao Laoshan Pipe Industry has established a comprehensive product system covering five major categories, including PVC, PP-R, PE, HDPE, and PE-RT, with over ten series. Whether for cold and hot water supply in construction projects, sewage treatment in municipal projects, or applications in communication power transmission, gas delivery, and agricultural drainage, suitable high-quality pipeline solutions are available. The PP-R pipes are co-extruded with high-tech nano-antibacterial materials, achieving an antibacterial rate of over 99%, with hygiene standards fully compliant with national regulations, making them directly suitable for purified water delivery systems. PVC pipes, leveraging advantages such as lightweight, corrosion resistance, and low flow resistance, have become the preferred material for municipal and construction projects, with all product types capable of meeting long-term usage requirements across various scenarios.

The 2025 Fourth Quarter "Pioneer Housing Construction · Party Branch Roundtable" meeting of the Building Materials Department Party Branch was successfully held in the second-floor conference room of Qingdao Laoshan Pipeline Technology Co., Ltd. This meeting was organized by the Party Branch of the Building Materials Department at the Qingdao Construction Engineering Management Service Center. Relevant leaders and staff from the Municipal Construction Management Center, representatives from local communities, and the head of Qingdao Laoshan Pipe Industry Technology Co., Ltd. gathered together. Guided by Party building, they engaged in in-depth discussions and exchanges on key topics such as the supervision of the building materials industry, the optimization of the business environment, and the application of high-quality building materials, aiming to foster consensus for development.

Laoshan, located in Qingdao, eastern China, is a major mountain range on the Shandong Peninsula and a famous scenic spot. Laoshan attracts countless tourists to visit due to its steep terrain, beautiful scenery, and rich cultural heritage. Laoshan is not only a natural treasure, but also a cultural treasure trove full of historical charm and cultural connotations. In this beautiful mountain range, Laoshan Pipe Industry has become a trusted choice for the construction industry with its excellent quality and excellent service.

Corporate culture is the soul of the company and the inheritance of the corporate spirit. On August 26, 2020, the internal corporate culture training course of "Inheriting the Spirit of Struggle and Revealing the Style of Laoshan" was held at the Laoshan Pipe Industry Technology Operation Headquarters!